Understanding the Matrix and Magnum Leg Press Machines: Starting Weights, Sleds, and Resistance Explained

The Matrix and Magnum leg press machines are two of the most respected names in commercial gym equipment. Whether you're training for strength, hypertrophy, or simply improving lower body endurance, knowing the machine's starting weight, sled weight, and resistance system is crucial for tracking progress and preventing injury.

---

Matrix Leg Press: Sled Weight and Starting Resistance

Matrix Fitness produces a range of leg press machines, but one of the most commonly used is the Matrix 45-Degree Leg Press. This machine typically starts with a sled weight between 85 to 100 lbs when unloaded. Some commercial gym models may even have a slightly higher starting resistance due to the sled's angle and built-in friction.

Key specs for most Matrix leg press machines:

• Sled Weight (without plates): ~90 lbs

• Starting Resistance: 90–100 lbs

• Incline Angle: 45 degrees (on most commercial models)

• Machine Weight (without plates): Varies, but often ~590 lbs including frame

It’s important to remember that the actual force your legs need to generate is affected by the angle of the machine and the mechanical design—meaning that even without plates, you're still pressing significant weight.

---

Matrix Leg Press Models: Common Observations

1. Matrix Leg Press Machine Weight (Total Equipment Weight): Machines like the Matrix Main 14 or Matrix +1 20 590 models are built with heavy-duty frames. These machines often weigh over 500 lbs, emphasizing their stability and durability.

2. Matrix Leg Press Machine Weight Without Plates: Depending on the exact model, the sled itself may weigh 70 to 100 lbs, while the total weight of the machine can exceed 500 lbs. Users should be aware of this when calculating total resistance.

3. Starting Weight Variations: Some Matrix models may begin with lighter resistance for rehabilitation or beginner-friendly use—around 50–70 lbs—but this is model-specific.

---

Magnum Leg Press: What to Know

Magnum, a legacy brand now under Matrix, also produces highly-regarded plate-loaded leg press machines. These machines are often seen in strength-focused gyms and training centers.

• Magnum Leg Press Starting Weight (Sled Only): ~50–70 lbs

• Magnum Leg Press Machine Weight (Unloaded): Typically 400–600 lbs

• Sled Resistance with No Plates: Some users report a starting feel of 90 lbs, depending on the friction and sled track angle

The Magnum Fitness Systems Leg Press is often built for performance and heavy-duty training. Its sled provides a consistent resistance curve, allowing for smoother rep execution under load.

---

Choosing Between Matrix and Magnum Leg Press Machines

Both Matrix and Magnum leg press machines are engineered for durability, smooth movement, and biomechanically efficient leg training. Here’s a brief overview to compare:

---

Final Notes for Lifters

When using a Matrix or Magnum leg press, always factor in the unloaded sled weight when planning your training. What may appear as an empty machine can already provide 70–100 lbs of resistance, depending on the model. This built-in resistance is especially important when performing high-rep sets, recovering from injury, or introducing beginners to resistance training.

Additionally, always refer to your specific gym’s model—differences in sled mechanics, pulleys, or incline angles can significantly change how much load you're truly pushing.